 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| KC three-terminal inductor/capacitor EU features * * * * * Compact physical dimensions Excellent wave reduction control Exceptional EMI attenuation Excellent as impedance matching for signal lines Marking: Brown and black body color with no marking (1J & 2AF) White and black body color (2A & 2B) * Products with lead-free terminations meet EU RoHS requirements dimensions and construction L NEW Size f 1J & 2AF 1J 2AF 2A NEW L W Dimensions inches (mm) t g e f N/A N/A W .062.008 .031.008 .024.008 .016.008 .008.006 (1.60.2) (0.80.2) (0.60.2) (0.40.2) (0.20.15) .079.008 .049.008 .031.008 .016.012 .012.008 (2.00.2) (1.250.2) (0.80.2) (0.40.3) (0.30.2) t .079.008 .049.008 .063.008 .016.008 .004 Min. .02.006 (2.00.2) (1.250.2) (1.60.2) (0.40.2) (0.1 Min.) (0.250.15) .126.012 .063.012 .098.012 .031.012 .004 Min. .004 Min. (3.20.3) (1.60.3) (2.50.3) (0.80.3) (0.1 Min.) (0.1 Min.) L e g L e 2B W f 2A t t W f 2B e g e e g e ordering information New Part # KC Type 2AF Size 1J 2AF 2A 2B T Termination Material T: Sn TE Packaging TD: 7" paper tape (1J & 2AF only 4,000 pieces/reel) TE: 7" embossed plastic (2A only 2,000 pieces/reel) (2B only 1,500 pieces/reel) 120 Capacitance Value (pF) 2 significant digits + no. of zeros N Capacitance Tolerance M: 20% N: 30% P: 25% 6N5 Inductance Value (nH) 6.5nH L Inductance Tolerance L: 15% EMI/EMC filtering For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/24/08 KOA Speer Electronics, Inc. * Bolivar Drive * P Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com .O. 279 KC three-terminal inductor/capacitor circuit schematic 1J & 2AF applications and ratings Item Operating Temperature Range Storage Temperature Range Measuring Condition (Standard) Temperature Relative Humidity Measuring Condition (Precision) Temperature Relative Humidity Specification -40C to +85C -40C to +85C (after soldering) 15C to 35C 1J, 2AF, 2B: 20 - 90%; 2A: 45 - 85% 20C 1C 1J, 2AF, 2A: 60 - 67%: 2B: 20 - 90% 2A & 2B applications and ratings (continued) Part Designation NEW Capacitance (pF) % 68 25% 9.5 25% 22 25% 35 25% 55 25% 150 30% 330 30% 22 30% 16 30% 70 30% 12 30% 18 30% 35 30% 10 30% 20 20% 45 20% 85 20% 190 20% 340 20% Inductance (nH) % 12 15% 30 15% 8.0 15% 8.0 15% 8.0 15% 16.5 15% 16.5 15% 3.0 15% 3.0 15% 8.5 15% 6.5 15% 13 15% 15 15% 11 15% 17 15% 37 15% 37 15% 37 15% 67 15% Rated Voltage DC (V) Rated Current DC (mA) Insulation Resistance Minimum (M) Operating Temperature Range -20C to +85C KC1JTTD680P12NL KC1JTTD9R5P30NL KC1JTTD220P8N0L KC1JTTD350P8N0L KC1JTTD550P8N0L KC2AFTTD151N16N5L KC2AFTTD331N16N5L KC2AFTTD220N3N0L KC2AFTTD160N3N0L KC2AFTTD700N8N50L KC2ATTE120N6N5L KC2ATTE180N13NL KC2ATTE350N15NL KC2BTTE100N11NL KC2BTTE200M17NL KC2BTTE450M37NL KC2BTTE850M37NL KC2BTTE191M37NL KC2BTTE341M67NL 16 200 1000 -40C to +85C 25 200 1000 -40C to +85C 25 200 1000 -40C to +85C 25 200 1000 -40C to +85C Typical Cut-off Frequency (Att = 3dB) 20 MHz 400 MHz 200 MHz 100 MHz 50 MHz 50 MHz 20 MHz 200 MHz 400 MHz 100 MHz 530 MHz 360 MHz 180 MHz 660 MHz 320 MHz 140 MHz 70 MHz 30 MHz 20 MHz NEW environmental applications Performance Characteristics Parameter EMI/EMC filtering Requirement Within the tolerance Within the tolerance Test Method Voltage: DC25V (2AF, 2A), DC16V (1J) Test Time: 60 seconds Frequency: 1MHz Voltage: 1V Equipment: HP4192A Fixture: HP16034E Frequency: 1MHz Current: 10mA Equipment: HP4192A Fixture: HP16034E Frequency: 1MHz Current: 10mA Equipment: HP4192A Fixture: HP16034E 5/23/07 Insulation Resistance Capacitance Inductance Within the tolerance Resistance (2A only) Within the tolerance Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 280 KOA Speer Electronics, Inc. * Bolivar Drive * P Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com .O. KC three-terminal inductor/capacitor environmental applications (continued) Performance Characteristics Parameter Capacitance vs. Temperature Characteristics Requirement Variation rate of capacitance in operate temperature are shown below: Part: KC2AT120N6NSL KC2AT180N13NL KC2AT350N15NL KC2BTTE100N11NL KC2BTTE200M17NL KC2BTTE450M37NL KC2BTTE850M37NL KC2BTTE191M37NL KC2BTTE341M67NL No physical damage Rate: 10% 10% 10% 5% 5% 5% 5% 10% 10% Test Method The capacitance shall be measured at each stage below. The rate shall be calculated against the capacitance measured at 20C. Step: 1 2 3 4 Temperature: 20C -40C 3C 20C 85C 3C Terminal Adhesion Strength Solder a chip to a test substrate and then laterally apply a load (5N, 500gF) in the arrow direction Force Direction Substrate Chip Resistance to Solder Heat Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Withstand Voltage: No abnormality More than 95% of the terminal electrode shall be covered with new solder Flux: 25% rosin Preheating: 120 to 180 seconds Preheating Temperature: 150C to 200C (1J, 2AF, 2B) Solder: H60A Solder Temperature: 260C 5C Dip Time: 5 seconds 0.5 second Flux: 25% rosin Solder: H60A Solder Temperature: 235C 5C Dip Time: 2 seconds 0.5 second Repeat the following heat cycle 10 times: Step: 1 2 3 4 Temperature: -40C 3C Room Temp. 85C 2C Room Temp. Time: 30 minutes 15 minutes 30 minutes 15 minutes 3 minutes maximum 3 minutes maximum Solderability Temperature Cycle* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Withstand Voltage: No abnormality High Temperature Resistance* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Withstand Voltage: No abnormality Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Temperature: 70C 2C Bias: DC25V (2AF, 2A, 2B), DC16V (1J) Bias: DC200mA Test Time: 500 hours Temperature: 85C 2C Humidity: 85% 5% Test Time: 500 hours After soldering a chip to a test substrate, Substrate bend the substrate by 1 mm and then measure. The substrate is GE4 or based on GE4. 45 2 Temperature: 40C 2C Humidity: 90 - 95% Bias: DC25V Bias: DC200mA Test Time: 500 hours 20 Humidity Resistance (Unload)* Substrate Bending Test Weight Displacement 45 2 Humidity Resistance (Load)* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance * After temperature cycle test, high temperature resistance test or humidity resistance test, the tested sample should be measured after having been left in temperature from 15C to 35C and relative humidity from 20% to 90% for 24 hours. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3/12/07 KOA Speer Electronics, Inc. * Bolivar Drive * P Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com .O. 281 EMI/EMC filtering |
Price & Availability of KC2AFTTD700N8N50L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |